OnePlus One TWRP Recovery: in order to install the OnePlus One TWRP recovery, you must first have Unlocked the OnePlus One Bootloader. If your OnePlus One bootloader is unlocked, then you may proceed with this tutorial accordingly. This is the second step to rooting your OnePlus One.
Things You’ll Need
- Rename the recovery file that you downloaded above to recovery.img and move the .img file into the ADB folder that your downloaded and extracted on your desktop (this step is in the tutorial for the bootloader unlocking).
- Turn the OnePlus One off. Boot it into fastboot mode by holding volume up + power. The OnePlus One will display “fastboot” indicating that it has successfully entered fastboot mode
Once the device is in fastboot mode, you will need to connect it to one of your computers via the USB cable that came wit your OnePlus One and run the following commands. (You must open a command prompt window from the ADB folder. Hold the Shift button and Right click on the White space of the folder and click on “Open Command Window here”). When the window opens, enter the following command:
- fastboot flash recovery recovery.img If the command does not work, or if you receive an error like can’t find recovery.img then, type fastboot flash recovery and press spacebar, then, drag the recovery.img into the command window and press enter to flash.
Once the flash has completed. Switch off your OnePlus One by Holding the power button until the OnePlus One reboots. Once the OnePlus One restarts, the OnePlus One TWRP recovery will be installed on your OnePlus One. Congratulations, you may now proceed to Root your OnePlus One smartphone. Check out the video below if you want to see how to perform the steps above.
Video: How to Install Custom Recovery (TWRP) on OnePlus One
OnePlus Exclusive: This video will show you How to Install TWRP Custom Recovery on OnePlus One.
Fastboot Install Method (No Root Required):
You will need the platform-tools from the Android SDK on your computer. Find the SDK Only section on the page linked and install the SDK and download only the platform-tools to get adb and fastboot binaries.
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode. Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no responsibility for any damage that may occur from installing or using TWRP.